2-channel analog input, ±10…±1.25 V, ±20 mA, 24 bit, 1 ksps ELM3142-0000
XFC – eXtreme Fast Control
current measurement
voltage measurement

ELM3142-0000 | 2-channel analog input, ±10…±1.25 V, ±20 mA, 24 bit, 1 ksps

The 2-, 4-, 6- or 8-channel ELM314x EtherCAT Terminals in the Economy line can be set to current or voltage measurement channel by channel, offering sampling rates of up to 1 ksps per channel. Analog signals in the ranges from ±1.25 to ±10 V, 0 to 10 V, ±20 mA or 0/4 to 20 mA can be processed. The settings for U or I measurement mode and the desired measuring ranges can be selected via the control system and TwinCAT in the CoE interface. Here it is also possible to select the extensive diagnostics features for unattended long-term use. The 2-, 4- or 6-pin push-in connectors can be removed for maintenance purposes; they enable a direct supply of connected sensors. The power contacts on the side simplify the potential distribution directly on the DIN rail. The typical EtherCAT features are available: distributed clocks functionality with timestamp and the familiar data features of the basic line such as filtering, true RMS calculation and more. Available on request as variant with factory calibration certificate or ISO 17025-/DAkkS-compliant certificate including Beckhoff recalibration service.

Features ELM314x
Voltage measurement ±10/5/2.5/1.25 V, 0…5/10 V
Current measurement ±20 mA, 0/4…20 mA, NAMUR NE43
Technical data ELM3142-0000
Number of channels 2
Technology voltage or current measurement, configurable for each channel
Signal type differential
Connection technology 2-/3-/4-wire
Connection type push-in, service plug 4-pin
Max. sampling rate max. 1 ms/1 ksps (per channel, multiplex)
Oversampling factor n = 1…20 selectable
Internal resistance > 4 MΩ (voltage), typ. 200 Ω (current)
Measuring error up to < typ. ±100 ppm/±0.01 %, relative to the respective full scale value @ 0…50 °C
Functional diagnostics yes
Connection diagnostics broken wire/short circuit
Distributed clocks yes, accuracy << 1 µs
Resolution 24 bit (incl. sign)
Current consumption power contacts load-dependent
Current consumption E-bus typ. 250 mA
Weight approx. 350 g
Operating/storage temperature 0…+55 °C/-25…+85 °C
Thermal dissipation typ. 2 W
Special features ExtendedRange 107 %, free numeric filter, TrueRMS, integrator/differentiator, non-linear scaling, PeakHold, service plug, Timestamp
Approvals/markings CE, UL
ZS9100-0002 shield connection for ELM series, shield diameter 7…16 mm
ZS9100-0003 shielding hood for EtherCAT measurement modules with push-in connector (ELM3xxx-0000), to provide shielding against external interference and temperature stabilisation at the measuring points when measuring temperature, black, scope of supply: shielding hood, screws, tie wraps