2-channel measuring bridge analysis, full/half/quarter bridge, 24 bit, 1 ksps, TEDS ELM3542-0000
XFC – eXtreme Fast Control
extended temperature range
measuring bridges

ELM3542-0000 | 2-channel measuring bridge analysis, full/half/quarter bridge, 24 bit, 1 ksps, TEDS

The ELM3542 and ELM3544 EtherCAT Terminals from the ELM3x4x economy series are designed for the evaluation of measuring bridges in full bridge, half bridge and quarter bridge configuration. With a maximum data rate of 1 ksps per channel they are ideally suited for the recording of less dynamic procedures, such as slow oscillations and corresponding weighing procedures. In return, they measure with extremely low noise and are temperature-stable up to an ambient temperature of 60 °C. The integrated bridge supply can supply 1 to 12 V and, like all other parameters, is adjustable online in the CoE at runtime. In addition, the ELM3542 features a connection for one TEDS-IC in the sensor per channel – this way the SG can be electronically read, detected and also written immediately upon plugging in. Apart from that, the ELM354x have all the features familiar from the fast ELM350x basic series, such as internally switchable extension resistors and comprehensive sensor and function diagnostics for industrial 24/7 operation. The 6-pin connector (push-in) is removable for maintenance purposes without releasing the individual wires.

Available on request as variant with factory calibration certificate or ISO 17025-/DAkkS-compliant certificate including Beckhoff recalibration service.

Features ELM354x
Strain gauge quarter bridge (350 Ω + 120 Ω), half bridge (up to ±16 mV/V), full bridge (up to ±32 mV/V), internal bridge completion and supply adjustable 0…12 V (2-/3-/4-/5-/6-wire connection), shunt calibration
Voltage measurement ±10 V, ±80 mV, 0…10 V
Potentiometer measurement potentiometer ≥ 1 kΩ, supply integrated and adjustable 0…12 V
Temperature measurement (RTD) PT1000
Technical data ELM3542-0000
Number of channels 2
Technology resistor bridge, strain gauge
Signal type differential
Connection technology 2-/3-/4-/5-/6-wire
Connection type push-in, service plug 6-pin
Max. sampling rate max. 1 ms/1 ksps (per channel, multiplex)
Oversampling factor n = 1…25 selectable
Internal resistance > 4 MΩ
Measuring error up to typ. < ±100 ppm/±0.01 % relative to the respective full scale value
Functional diagnostics yes
Connection diagnostics broken wire/short circuit
Distributed clocks yes, accuracy << 1 µs
Resolution 24 bit (incl. sign)
Current consumption power contacts typ. 45 mA + load, in total max. typ. 150 mA
Current consumption E-bus typ. 100 mA
Weight approx. 350 g
Operating/storage temperature -25…+60 °C/-40…+85 °C
Thermal dissipation typ. 3 W
Special features ExtendedRange 107 %, free numeric filter, TrueRMS, integrator/differentiator, non-linear scaling, PeakHold, TEDS connection option, 4-wire quarter bridge measurement
Approvals/markings CE
ZS9100-0002 shield connection for ELM series, shield diameter 7…16 mm
ZS9100-0003 shielding hood for EtherCAT measurement modules with push-in connector (ELM3xxx-0000), to provide shielding against external interference and temperature stabilisation at the measuring points when measuring temperature, black, scope of supply: shielding hood, screws, tie wraps
Product announcement
estimated market release 4th quarter 2020